Xmotorstore Payments
Malossi inclined 15x19 mm intake manifold 02 5035B
Code: 02 5035B
Malossi inclined intake manifold
Malossi inclined 15x19 mm intake manifold 02 5035B
Code: 02 5035B
Malossi inclined intake manifold
Reference: 213.0046
Brand: POLINI
Malaguti F10 F12 reed valve 213.0046
Reference: 3111142
Brand: Malossi
Malossi cylinder diameter 47 in cast iron Malossi code: 3111142
Reference: 1124.82.40.06-1
Brand: Domino
Pair of Domino Dakar knobs 128mm closed 1124.82.40.06-1 Pair of grips in thermoplastic rubber with multi-pyramidal finish. Material: Thermoplastic rubber Black colour Length: 128 mm End: Closed Handlebar / Gas tube diameter: 22/26 mm Flange diameter: 54 mm Handle diameter Knob mounted: 31.5 mm
Reference: 166.0100
Brand: POLINI
Polini cylinder kit diameter 63 mm. Polini Code: 166.0100 Polini cylinder kit for: Benelli, Benelli Velvet 125, Benelli Velvet 150, Italjet, Italjet Millenium 125, Italjet Millenium 150, Malaguti, Malaguti Madison 125, Malaguti Madison 150, Malaguti F 12 125 Phantom, Mbk, Mbk Doodo 125, Mbk Doodo 150, Mbk Skyliner 125, Mbk Skyliner 150, Mbk Thunder 125,...
Reference: 02917
Brand: DELLORTO
Carburetor Dellorto phbg 21 bs wire starter 02917. Code Dellorto 02917. Calibration Phbg 21 bs wire starter: Filter connection: 32mm. Engine connection: 25mm. Maximum jet: 75. Minimum jet: 33. Float bowl: 4gr. Starter jet: 60. Nozzle: 262 AU.
Reference: 6111150B
Brand: Malossi
Malossi mobile half-pulley for MULTIVAR 2000 variator Malossi code: 6111150B
Reference: 5215401
Brand: Malossi
Malossi discs set for original Yamaha Tmax 500 cc clutch 5215401 Code: 5215401 The new clutch kit is born from the experience acquired in the TMax Trophy! Tuned directly on the track, this new clutch plate series is the result of many years of experience acquired on the racing circuits. It adapts perfectly to the characteristics of the scooter, offering...
Reference: 241.200
Brand: POLINI
Polini universal variator for Piaggio Gilera mopeds 241.200 Code: 241.200 Application: Gilera, Piaggio, Piaggio Ciao
Reference: 203.0080
Brand: POLINI
Polini straight plastic air box. Available in the variants: 203.0080 filter for Phbg, measures: 32x100x80 203.0081 filter for Phbg racing, measures: 37x100x80 203.0082 filter for Cp Polini, measures: 46x100x80
Reference: 244.012
Brand: POLINI
Fixed half-pulley Yamaha Mbk Aprilia in steel. Polini Code: 244.012 ATTENTION! THE EVOLUTION BELT, SPEED DRIVE AND CONTRAST SPRING COMPONENTS MUST BE ASSEMBLED TOGETHER ONLY
Reference: 504003
Brand: T4TUNE
Typhoon 345mm adjustable hydraulic shock absorber
Reference: 3112905
Brand: Malossi
Malossi MHR REPLICA cylinder diameter 40 aluminum Malossi code: 3112905
Reference: 230.0404
Brand: POLINI
Vespa 125/150/200 gearbox cruise Code: 230.0404 Vespa gearbox cross for: Vespa, Vespa 125 2T PX, Vespa 150 2T PX, Vespa 150 2T sprint fast, Vespa 200 2T PE, Vespa 200 2T PX, Vespa 125 2T ts
Reference: 143.400.002
Brand: POLINI
Polini carbon reeds set 0.28 and 0.33 thick. Polini Code: 143.400.002
Reference: A2104
Brand: Alfano
45 cm candle temperature sensor A2104. This normal version NTC sensor must be installed with a 14mm diameter spark plug. Caution: It is important to remove the sealing washer from the spark plug before installation. Note: This sensor must be used with an A3301 extension cable or A2190 hub.
Reference: 215.0432
Brand: POLINI
Polini 360 degrees intake manifold for Yamaha horizontal compatible with Mikuni 24/26/28 mounting towards the wheel. Polini Code: 215.0432 This manifold is used with the carburetor mounted towards the rear wheel, subject to modification of the frame. MBK: NITRO 50 H2O - NITRO 50 H2O from 1996-> YAMAHA: AEROX 50 2T H2O from 2004->
Malossi inclined 15x19 mm intake manifold 02 5035B
Code: 02 5035B
Malossi inclined intake manifold
