- New

Xmotorstore Payments
Exhaust K sensor for thermocouple A2151. 40cm "K" exhaust sensor "Professional quality, red label".
This K thermocouple technology sensor must be installed on the exhaust pipe.
Read the explanation on installing and using this sensor, this document is located under the heading SUPPORT
Note: This sensor must be used with an A3401 extension cable or A2190 hub.
Exhaust K sensor for thermocouple A2151. 40cm "K" exhaust sensor "Professional quality, red label".
This K thermocouple technology sensor must be installed on the exhaust pipe.
Read the explanation on installing and using this sensor, this document is located under the heading SUPPORT
Note: This sensor must be used with an A3401 extension cable or A2190 hub.
Reference: 01.IF.0036.L
Brand: Ohvale
Ohvale Gp-0 front brake disc 190 mm thickness 4 mm. Ohvale code: 01.IF.0036.L Attention: If you switch from Ohvale 180 mm disc to 190 mm, you must purchase 2 spacers for the caliper. Code to match: 01.IF.0033.L
Reference: 03.IF.0002.L
Brand: Ohvale
Ohvale front radial caliper Gp-2 Code: 03.IF.0002.L
Reference: 31 8286
Brand: Malossi
Malossi cylinder diameter 47 in cast iron with pin diameter 12 for BSV Dio ZX 1994 50 cc / Honda DIO ZX 2T 1994 50 cc Malossi code: 31 8286 Malossi cylinder for BSV Dio ZX 50 2T 1994- (AF34E) for original head. Malossi cylinder for Honda Dio ZX 50 2T 1994- (AF34E) for original head.
Reference: Or.tra.L
Brand: GRC
Or pump drive to wheel, or connect the water pump pulley to the rear wheel hub pulley.
Reference: 01.SW.0102.L
Brand: Ohvale
Ohvale Washer 8.5×2×18 Code: 01.SW.0102.L
Reference: 01.IF.0080.L
Brand: Ohvale
Formula Ohvale Gp-0 front brake hose. Ohvale code: 01.IF.0080.L
Reference: 213.0604
Brand: POLINI
Carbon sheets 110X100mm thickness 0.28mm. Carbon plates to cut out for slats. Polini Code: 213.0604
Reference: 5176.03-02
Brand: Domino
XM2 Domino throttle control with knobs 5176.03-02 Aluminum throttle with black / red mod A010 knobs open. Three ring nuts (Green, White, Red) to adjust the speed of the throttle control. Domino throttle control for racing use. Support material: Aluminum Support finish: Painted Black colour Rapidity (Red ring): 2.7 ° / mm Max Stroke (Red Ring): 25 mm...
Reference: 2016/28
Brand: STAMAS
Cnc support for factory hydraulic front brake caliper plus screws for 28 mm stems
Reference: 171.0552
Brand: POLINI
APRILIA: SR 50 2T R, FACTORY (Piaggio) LC - SR 50 2T R, FACTORY (Piaggio) LC E4DERBI: GP1 50 EURO2, OPEN, RACE dal 2005-> - GP1 50 2001-2003GILERA: DNA 50 - RUNNER 50, SP, POGGIALIPIAGGIO: EXTREM LC - MC2 50 (1998) - NRG MC3 H2O - NRG, NTT, MC2 - NRG Power DD - QUARTZ - ZIP 50 2T SP H2O dal 2001 - ZIP 50 2T SP H2O dal 1996 al 2000 Attention: by...
Reference: 01.SZ.1002.L
Brand: Ohvale
O-RING 106.8×2 Ohvale 110 4S Code: 01.SZ.1002.L
Reference: 4613315
Brand: Malossi
Malossi Twins rear shock absorber 4613315 Malossi code: 4613315 Malossi Twins rear shock absorber, wheelbase 290 mm. Technical features -Type: oil-pneumatic shock absorber -Road use -12 mm shock absorber rod in hardened and tempered C43 steel -Piston in steel and sintered bronze -New Swedish steel lamellar system -Piston guide shoe of the LUBRIFLON-PTFE...
Reference: 243.079
Brand: POLINI
Polini contrast spring for Piaggio Beverly 350 Code: 243.079 Application: Piaggio, Piaggio X10 350 4T 4V ie E3, Piaggio Beverly 350 4V ie E3
Reference: 5516958
Brand: Malossi
Malossi Vespower ignition with 20 mm diameter cone Malossi Code: 5516958 Malossi Vespower ignition with 20 mm diameter cone and 0.9 kg flywheel Complete ignition line for the entire vintage Vespa range with gears. To allow a perfect and easy installation, a specific version has been studied for each model. The ignition is distinguished by: - Lightened...
Reference: 5513356
Brand: Malossi
Rotor and stator assembly Malossi 5513356 Code: 5513356 Malossi rotor and stator assembly for pit bikes and mini gp 4t
Exhaust K sensor for thermocouple A2151. 40cm "K" exhaust sensor "Professional quality, red label".
This K thermocouple technology sensor must be installed on the exhaust pipe.
Read the explanation on installing and using this sensor, this document is located under the heading SUPPORT
Note: This sensor must be used with an A3401 extension cable or A2190 hub.