- Reduced price
- New

Xmotorstore Payments
Polini fan cover spacer thickness 3 for Vespa small frame.
The Polini fan casing spacer for Vespa small frame was created to prevent the fan fins from hitting the conveyor cover following the replacement of the flywheel / ignition with tuning components.
A remedy often used to overcome this problem is to place washers under the outer cover. This solution, however, leaves a gap on the periphery of the casing, significantly reducing the cooling air flow.
With the Polini fan casing spacer, this inconvenience is avoided while ensuring an optimal air flow for cooling the engine.
The spacer is made of stainless steel to resist corrosion and prevent deformation and is supplied complete with 3 screws longer than the originals to compensate for the added thickness, ensuring optimal thread grip.
Code: 170.1002
Polini fan cover spacer thickness 3 for Vespa small frame.
The Polini fan casing spacer for Vespa small frame was created to prevent the fan fins from hitting the conveyor cover following the replacement of the flywheel / ignition with tuning components.
A remedy often used to overcome this problem is to place washers under the outer cover. This solution, however, leaves a gap on the periphery of the casing, significantly reducing the cooling air flow.
With the Polini fan casing spacer, this inconvenience is avoided while ensuring an optimal air flow for cooling the engine.
The spacer is made of stainless steel to resist corrosion and prevent deformation and is supplied complete with 3 screws longer than the originals to compensate for the added thickness, ensuring optimal thread grip.
Code: 170.1002
Reference: WPA830
Brand: CAPIT
12 Volt battery charger, replacement for the Capit Warmme heated vest. Orderable with European, USA / Japan or Australian plug. Battery charger with plug for Australia (code WPA426) consisting of a single 7.4V battery (Not suitable for power banks) Battery charger with plug for USA and Japan (code WPA425), Europe (code WPA830) consisting of double 7.4V...
Reference: 204.0010
Brand: POLINI
Vespa 125cc piston 57 mm. Polini code: 204.0010
Reference: 6215059BB
Brand: Malossi
Malossi approved brake pads Malossi code: 6215059BB Malossi brake pads for AEON MOTOR COBRA 400 4T LC (V69C) Front NOT APPROVED THE ABSENCE OF APPROVED DOES NOT LIMIT THE INSTALLATION. Malossi brake pads for AEON MOTOR COBRA 50 2T (AT70) Rear NOT APPROVED THE ABSENCE OF APPROVED DOES NOT LIMIT THE INSTALLATION. Malossi brake pads for AEON MOTOR COBRA S...
Reference: 1612288
Brand: Malossi
Malossi Phbg 19 fuel system for Kymco Mxer 50cc 1612288 Malossi code 1612288 Application: Malossi fuel system for Kymco MXer 50 2T
Reference: 03.IF.0019.L
Brand: Ohvale
Ohvale Rear brake caliper support Code: 03.IF.0019.L
Reference: 140.0065/10
Brand: POLINI
Piaggio Ciao cylinder kit 43 mm diameter, 10 mm diameter plug. Polini code: 140.0065/10 Piaggio cylinder kit for: Piaggio, Piaggio Ciao Pin diameter 10 mm Cast iron cylinder
Reference: SU202F01
Brand: CAPIT
Capit Suprema Spina 17 inch motorcycle tire warmers. Capit Smart Spina tire warmers 17-inch for motorcycles. TNT technology (there is no thermostat). The temperature reached is 95 ° C and 203 ° F. The thorns present are: - European type (EU - 220/230 Volt) - English (UK - 230 Volt) - American / Japanese (USA / JPN - 100/110 Volt) - Australian (AUS - 240...
Reference: 204.0920
Brand: POLINI
Vespa piston 200cc 2t 68mm double band. Polini Code: 204.0920
Reference: 01.SW.0215.L
Brand: Ohvale
Ohvale Bolt M6x12 Code: 01.SW.0215.L
Reference: 53012 78
Brand: DELLORTO
Lever starter kit for Dellorto PHBG PHBD carburettor. Dellorto code: 53012 78. Lever choke for Dellorto PHBG carburettor. Lever choke for Dellorto PHBD carburettor. Lever air starter kit for Dellorto phbg and phbd carburettor, compatible with all sizes, suitable for solving space problems linked to the classic vertical knob.
Reference: 03.TE.0190.L
Brand: Ohvale
Alfano support for Ohvale Gp-0 and Gp-2. Ohvale code: 03.TE.0190.L Support to mount the Alfano instrumentation on Ohvale. The Ohvale support for Alfano is applied to the radiator attachment, using the supports already present as standard on all Ohvale. The kit includes the Alfano support plate and the following screws: 2x TBEI 6x35 and 2x TBEI 6x30. These...
Reference: 03.FA.0117.L
Brand: Ohvale
Mupo Ohvale Gp-2 fork overhaul kit. Ohvale code: 03.FA.0117.L
Reference: 10057
Brand: LeoVince
Carbon protection for sprocket Kawasaki Kx 250F from 09 to 12
Reference: 206.0322
Brand: POLINI
Polini trapezoidal segment diameter 65x1.4 mm 206.0322 Polini trapezoidal segment for: Gilera, Gilera Runner 125, Gilera Runner 180, Polini
Reference: 29 9976.r0
Brand: Malossi
Malossi red variator contrast spring (external diameter 65.40x100 mm - wire diameter 5.2 mm - k 9) Malossi code: 29 9976.r0 Springs in high carbon silicon alloy steel, heat treated, dynamically balanced, oven painted and designed and calculated for each specific application.
Reference: 060003
Brand: T4TUNE
Black DEMON approved motorcycle arrows Code: 060003 Ean: 9900000000806
Polini fan cover spacer thickness 3 for Vespa small frame.
The Polini fan casing spacer for Vespa small frame was created to prevent the fan fins from hitting the conveyor cover following the replacement of the flywheel / ignition with tuning components.
A remedy often used to overcome this problem is to place washers under the outer cover. This solution, however, leaves a gap on the periphery of the casing, significantly reducing the cooling air flow.
With the Polini fan casing spacer, this inconvenience is avoided while ensuring an optimal air flow for cooling the engine.
The spacer is made of stainless steel to resist corrosion and prevent deformation and is supplied complete with 3 screws longer than the originals to compensate for the added thickness, ensuring optimal thread grip.
Code: 170.1002