- Reduced price
- New

Xmotorstore Payments
Polini presents the new complete fuel system for Vespa PX 125/150 Ø30 including: increased Ø30 carburetor, reed valve, air filter, sleeve and screws.
The kit is designed to obtain more performance than the original fuel system.
The carburetor is cast in light aluminum alloy, it is distinguished by having a flat valve in chromed light alloy to improve sliding and is resistant to abrasion and wear. Each carburetor is subjected to scrupulous leakage and petrol level checks in order to always have the same carburetion adjustment parameters.
The reed manifold has two main characteristics: the first is to allow an oversized carburetor to be housed in the Vespa, the second allows the use of the engine with an intake valve damaged by wear.
Polini reed fuel system for: Vespa, Vespa 125 2T PX, Vespa 150 2T PX, Vespa 150 2T sprint fast, Vespa 125 2T ts, Lml, Lml star deluxe 125 2T, Lml star deluxe 150 2T
Calibrations:
Maximum jet 134
Minimum Jet 45
Needle PW30
Polini Code: 177.0094
Polini presents the new complete fuel system for Vespa PX 125/150 Ø30 including: increased Ø30 carburetor, reed valve, air filter, sleeve and screws.
The kit is designed to obtain more performance than the original fuel system.
The carburetor is cast in light aluminum alloy, it is distinguished by having a flat valve in chromed light alloy to improve sliding and is resistant to abrasion and wear. Each carburetor is subjected to scrupulous leakage and petrol level checks in order to always have the same carburetion adjustment parameters.
The reed manifold has two main characteristics: the first is to allow an oversized carburetor to be housed in the Vespa, the second allows the use of the engine with an intake valve damaged by wear.
Polini reed fuel system for: Vespa, Vespa 125 2T PX, Vespa 150 2T PX, Vespa 150 2T sprint fast, Vespa 125 2T ts, Lml, Lml star deluxe 125 2T, Lml star deluxe 150 2T
Calibrations:
Maximum jet 134
Minimum Jet 45
Needle PW30
Polini Code: 177.0094
Reference: 5515732
Brand: Malossi
Malossi Force Master 3 5515732 electronic control unit with injection for Bmw Code: 5515732 Malossi Force Master 3 electronic control unit for injection vehicles Technical features: Carburation adjustment ± 14% at LOW / HIGH / MID Rev limiter : + 1000 RPM 8 different mappings Lambda emulator Temperature range = -20°C +80°C Minimum operating voltage = +7V...
Reference: 1103.82.40.04
Brand: Domino
Domino sponge knobs black 132 mm open 1103.82.40.04 Material: Open cell foam rubber Black colour Length: 132 mm End: Open Handlebar / Gas tube diameter: 22/26 mm Flange diameter: 52 mm Handle diameter Knob mounted: 30-34 mm
Reference: 211.0294
Brand: POLINI
Polini cylinder head diameter 47 mm. Polini head for Piaggio Zip. Polini Code: 211.0294
Reference: 206.0340
Brand: POLINI
Polini segments diameter 68 mm 206.0340 Polini segments for: Vespa, Vespa 200, Polini
Reference: 5517192
Brand: Malossi
Malossi Power 5517192 ignition Code: 5517192 Malossi ignition only for Piaggio mopeds originally fitted with electronic ignition. In the preparation of engines, secondary attention is often paid to ignition. This component is instead of vital importance as it is the one that manages the exact moment in which to strike the spark on the spark plug and...
Reference: 9001
Brand: STAMAS
Universal radiator for minimoto, standard curved version. Radiator weight 535 grams. Hose connection 12 mm.
Reference: 51 7123
Brand: Malossi
Malossi Multivar 51 7123 variator Code: 51 7123 Malossi Multivar variator for Peugeot 103 rcx and spx 50cc. Multivar is very simple to apply and easy to operate. It is studied in every detail and tested on each specific application. With such a sophisticated variator, your scooter will acquire snap, shift linearity and greater mechanical "tranquility" in...
Reference: 178.2001
Brand: POLINI
Polini radial brake kit for Piaggio Zip and Vespa. Polini Code: 178.2001 Polini Motori presents the new radial brake kit, an advanced solution to improve the braking performance on Piaggio ZIP and Vespa 50 2T. Designed for Piaggio ZIP and Vespa 50 2T, the Polini braking system kit is composed of the 4-piston aluminum brake caliper; it is the heart of the...
Reference: 1117209
Brand: Malossi
Malossi gasket pack reed valve intake to cylinder for Vespa 125 cc Malossi code: 1117209
Reference: 143.695.009
Brand: POLINI
Locking key for Polini 2-mass clutch group 143.695.009. Polini clutch locking key for minimoto. The Polini clutch locking key is compatible with all engines that have hole spacing: 74 mm.
Reference: 250.002
Brand: POLINI
Polini clutch bell for Yamaha Minarelli diameter 107 mm Code 250.002 This Polini clutch bell is compatible as an original spare. Diameter: 107 mm Weight: 429 gr Application: Aprilia, Aprilia Area 51, Aprilia Rally 50 LC, Aprilia Sonic 50/50 GP, Aprilia Sr 50 2T LC Stealth, Aprilia Racing, Aprilia Netscaper, Aprilia Sr 50 2T WWW, Aprilia Scarabeo 50 2T,...
Reference: 280.0058
Brand: POLINI
VESPA: VESPA 200 2T PE, PX - VESPA 200 2T COSA
Reference: M086024-T41
Brand: PMT TYRES
Pmt T41 105 / 50R6.5 tire for minibike, slick design, T41 soft compound, hardness 55 Shore A, the T41 compound is suitable for racing use on dry track. We recommend a pressure of 1 to 1.4 bar on the front tire and 1.4 to 1.9 bar on the rear tire.
Reference: 2513158ba
Brand: Malossi
Malossi rear end cap 2513158ba Malossi code: 2513158ba Malossi rear end cap 2513158ba.
Reference: 6712144
Brand: Malossi
Malossi HTQ secondary gears z 15 / 47 with forced fit diameter 17 mm 6712144 Malossi code: 6712144. Transmission gears in special steel with straight teeth and recalculated ratio. They completely eliminate any axial thrust, reducing stress on the bearings. Made with very high precision machines, casehardened, tempered and ground in order to provide high...
Polini presents the new complete fuel system for Vespa PX 125/150 Ø30 including: increased Ø30 carburetor, reed valve, air filter, sleeve and screws.
The kit is designed to obtain more performance than the original fuel system.
The carburetor is cast in light aluminum alloy, it is distinguished by having a flat valve in chromed light alloy to improve sliding and is resistant to abrasion and wear. Each carburetor is subjected to scrupulous leakage and petrol level checks in order to always have the same carburetion adjustment parameters.
The reed manifold has two main characteristics: the first is to allow an oversized carburetor to be housed in the Vespa, the second allows the use of the engine with an intake valve damaged by wear.
Polini reed fuel system for: Vespa, Vespa 125 2T PX, Vespa 150 2T PX, Vespa 150 2T sprint fast, Vespa 125 2T ts, Lml, Lml star deluxe 125 2T, Lml star deluxe 150 2T
Calibrations:
Maximum jet 134
Minimum Jet 45
Needle PW30
Polini Code: 177.0094