Xmotorstore Payments
Minimoto water pipe fixing fitting in red ergal.
Xmotorstore presents its new product: Minimoto water pipe fixing fitting entirely machined from solid and anodized in red, particular attention has been paid to heat dissipation, thanks to the material that allows easy cooling.
The fitting is easily inserted into the minimoto water pipe, allowing the pipe to be fixed to the minimoto frame, using a clamp, to be applied in the dedicated slot.
Technical characteristics of the water pipe fixing fitting:
External diameter: 20 mm (clamp attachment).
Internal diameter: 9 mm.
Diameter of the h2o pipe fitting: 12 mm.
Length: 44 mm (total).
Internal slot for clamp: 3 mm.
Corners: V-beveled, for easy installation of the water pipes.
Color: racing red.
Material: Ergal.
Minimoto water pipe fixing fitting in red ergal.
Xmotorstore presents its new product: Minimoto water pipe fixing fitting entirely machined from solid and anodized in red, particular attention has been paid to heat dissipation, thanks to the material that allows easy cooling.
The fitting is easily inserted into the minimoto water pipe, allowing the pipe to be fixed to the minimoto frame, using a clamp, to be applied in the dedicated slot.
Technical characteristics of the water pipe fixing fitting:
External diameter: 20 mm (clamp attachment).
Internal diameter: 9 mm.
Diameter of the h2o pipe fitting: 12 mm.
Length: 44 mm (total).
Internal slot for clamp: 3 mm.
Corners: V-beveled, for easy installation of the water pipes.
Color: racing red.
Material: Ergal.
Reference: Or.tra.L
Brand: GRC
Or pump drive to wheel, or connect the water pump pulley to the rear wheel hub pulley.
Reference: 001002SP1170
Brand: DM
Special shaped water pipes for minimoto with IAME CS BZM POLINI GHR engine. The tubes are pre-formed and compatible with all mini bikes.
Reference: 001002SP129A
Brand: DM
Red silicone shaped H20 tubes kit for all minimoto models. The only pre-formed minimoto water pipes compatible with all engines.
Reference: 132
Brand: DM
Increased Dm minibike radiator, the oversized Dm radiator is dedicated to racing minibikes, it allows better engine cooling even in the most extreme conditions of use. Radiator weight Dm: 566 grams Pipe connections: 10 mm Attention: Artisan radiator handmade to order, delivery time 30 days.
Reference: GHR 012.001
Brand: GHR
Ghr fitting for water pipe, compatible with head, cards, cylinder.
Reference: pmp.h2o.tcm
Brand: Tecnominimoto
Minibike water pump d.35 increased, increases the flow of water in the cooling system, ensuring better engine performance. We recommend the use of silicone tubing to achieve maximum water cooling performance. Universal water pump for minimoto. Attention: the color may vary based on the manufacturer's construction choices.
Reference: Rac-sens-temp-mini
Brand: XRACING
Minimoto water temperature sensor fitting in red ergal. Xmotorstore presents its new product: Water temperature sensor fitting entirely machined from solid and anodized in red, particular attention has been paid to heat dissipation, thanks to the material that allows easy cooling. The fitting fits easily into the minimoto water pipe, allowing the...
Reference: 404628
Brand: T4TUNE
Left front indicator Kymco Agility 50 cc from 2010 to 2013. Code: 404628 Ean: 9900000060756
Reference: 31 6814
Brand: Malossi
Malossi cylinder kit diameter 65 in aluminum H2O for Honda CRM - NSR - Raiden LC 125 cc Malossi code: 31 6814 Malossi cylinder kit for Honda CRM 125 2T LC. Attention: it is necessary to replace the exhaust valves with the original ones of the NSR version. Malossi cylinder kit for Honda NSR 125 2T LC. Malossi cylinder kit for Honda Raiden 125 LC....
Reference: 29 8323.g0
Brand: Flösser
Malossi spring for variator contrast, green (external diameter 57.80x91 mm - wire diameter 3.9 mm - k 4.9) Malossi code: 29 8323.g0 Springs in high carbon silicon alloy steel, heat treated, dynamically balanced, oven painted and designed and calculated for each specific application.
Reference: i50 Spielberg Red Bull Ring
Brand: HJC
Hjc i50 Spielberg Red Bull Ring Helmet The new HJC off-road helmet has been designed to create ease and comfort for the rider in an aggressive and attractive design. A large repositioned opening optimizes downward visibility. The dual position of the mask adapts to the preferences of the pilot. The extended peak blocks sunlight and protects the pilot from...
Reference: FRZ.HM3
Brand: CS Racing
Clutch Cs minimoto HAMMER EPIC. Clutch for minimoto compatible with Cs, Iame, Ghr, Bzm engines. This clutch must be used with an 81mm bell. Cs clutch models: - HAMMER GT Low friction coefficient, allows greater slip without affecting performance - HAMMER GP Medium-high friction coefficient - HAMMER EPIC High Coefficient
Reference: 950.830.042
Brand: POLINI
Hi-speed Polini for Olieds move Plus / Sport e-bikes Code 950.830.042 Hi-Speed E-Bike Polini for: Olieds, move plus, sport Polini Hi-Speed is an electronic device designed for e-bike engines in order to increase active assistance by fully exploiting the performance that the engine can offer. Attention: for e-bikes equipped with lights powered by the main...
Reference: 215.0115
Brand: POLINI
Polini single reed intake manifold for Vespa ET3 24mm. Polini Code: 215.0115
Reference: 5510094
Brand: PBR
Motorcycle handlebar 28 / 22mm in blue ergal. Pbr: 5510094. Ergal handlebar diameter 28.6 mm in the central part (fork plate attachment) diameter 22 mm for knobs and controls. Without crossbar, road racing model. Measurements: A = 720 B = 150 C = 100 D = 105 mm With hole for 14 mm terminal
Reference: 3219051
Brand: Malossi
Malossi Fantic motard exhaust 50 cc 2t. Malossi code: 3219051. The Malossi supermoto mhr replica muffler is aimed at a sporty and demanding clientele. Characteristics: Expansion muffler in special steel plate (thickness 1 mm); obtained with T.I.G. robotic welding procedures and M.I.G. of the cones and counter-cones. With internal silencing bulkheads,...
Reference: 5914143
Brand: Malossi
Malossi power cam camshaft 5914143 Malossi S.p.A. presents a new camshaft for 4-stroke scooters, designed with the Cad-Cam system and manufactured with extreme precision. Ideal for giving your scooter a sporty character, it ensures excellent performance, with greater torque, acceleration and high cruising speed. Perfect for city traffic and long...
Reference: 206.0385
Brand: POLINI
Polini segment diameter 39.94x1.5 mm Polini segment for: Peugeot, Peugeot Ludix 50
Reference: A272A
Brand: Alfano
A272A exhaust connection to fix the Alfano A2151 sensor
Reference: 12001
Brand: STAMAS
Stamas stand minimoto, compatible with all minimoto. Peg distance internal 22mm external 31mm.
Reference: 30052904
Brand: HJC
Hjc RPHA 90 helmet visor model HJ-29. The rpha 90 hjc visor is available in the versions: Hjc RPHA 90 clear helmet visor 30052902 Visor for helmet Hjc RPHA 90 smoked 30052904 Helmet visor Hjc RPHA 90 dark smoke 30052905 Visor for helmet Hjc RPHA 90 silver 30052906 Visor for helmet Hjc RPHA 90 blue 30052907 Helmet visor Hjc RPHA 90 gold 30052910
Reference: 6716430B
Brand: Malossi
Wheel axle shaft 138.2 mm with 27 mm diameter keying Malossi 6716430B Malossi code: 6716430B
Reference: 251.0034
Brand: POLINI
Vespa 125 2t copper head gasket. Polini Code: 251.0034
Minimoto water pipe fixing fitting in red ergal.
Xmotorstore presents its new product: Minimoto water pipe fixing fitting entirely machined from solid and anodized in red, particular attention has been paid to heat dissipation, thanks to the material that allows easy cooling.
The fitting is easily inserted into the minimoto water pipe, allowing the pipe to be fixed to the minimoto frame, using a clamp, to be applied in the dedicated slot.
Technical characteristics of the water pipe fixing fitting:
External diameter: 20 mm (clamp attachment).
Internal diameter: 9 mm.
Diameter of the h2o pipe fitting: 12 mm.
Length: 44 mm (total).
Internal slot for clamp: 3 mm.
Corners: V-beveled, for easy installation of the water pipes.
Color: racing red.
Material: Ergal.
