- New

Xmotorstore Payments
Minibike rim red for Dm Grc Tcm.
Minibike rim with new racing design, entirely machined from solid, 58 mm internal groove section.
Rim compatible with hubs: TCM, DM, GRC and CBM.
Minibike rim red for Dm Grc Tcm.
Minibike rim with new racing design, entirely machined from solid, 58 mm internal groove section.
Rim compatible with hubs: TCM, DM, GRC and CBM.
Reference: M088014-T41
Brand: PMT TYRES
PMT 90/65R6.5 "T41 slick tires for minibike. For racing use only. type: minibike 6.5 drawing type: slick hardness mixes: 56 Shore A rubber width: 90mm rubber shoulder: 65 drawing usage: dry use of mix: racing recommended rim width: 60-66mm pressures: 1 - 1.4 Bar
Reference: M088024-T41
Brand: PMT TYRES
Pmt 110 / 55R6.5 "T41 Slick for minibike. For racing use only. type: 6.5 "minibike drawing type: slick hardness mixes: 56 shore A rubber width: 110mm rubber shoulder: 55 drawing usage: dry use of mix: racing recommended rim width: 66-72mm pressures: 1.4 - 1.9
Reference: 001002SP0080
Brand: DM
Front hub Dm in lightened ergal made in CNC, compatible with all Dm rims. Dm code: 001002SP0080
Reference: T41.90+110
Brand: PMT TYRES
Tires PMT T41 90/65-6.5 + 110/55-6.5 COMPETITION TIRES, SUITABLE FOR USE ON DRY TRACK. HARDNESS MIXES: 56 SHORE (MEDIUM - SOFT) RECOMMENDED PRESSURE: FRONT 1.0 TO 1.4 BAR / REAR 1.4 TO 1.9 BAR RUBBER DESIGN: SLICK OPTIMUM TEMPERATURE ASPHALT: 20/30 GRADI IDEAL TEMPERATURE USE: 65 DEGREES
Reference: F00 005
Brand: DM
Rear hub dm for hydraulic brake Formula Lightened rear hub 114 mm DM weight 190g THE HUB DOES NOT INCLUDE THE BEARINGS
Reference: 01.SB.0306.L
Brand: Ohvale
Ohvale Seal valve stem Code: 01.SB.0306.L
Reference: 01.SW.0206.L
Brand: Ohvale
Ohvale Valve locker Code: 01.SW.0206.L
Reference: A3406
Brand: Alfano
Special cable 200 cm for 0-5V sensor connections, must be connected to the Lambda input of Box12 A1160. Yellow wire = Ground (GND) Red wire = + 5V Green wire = Sensor signal from 0 to + 5V
Reference: 2912553
Brand: Malossi
Malossi RACING spring set for original maxi scooter clutch Malossi code: 2912553 RACING SPRING for ORIGINAL clutch Pre-hardened carbon steel springs with high yield strength, protected by a high heat resistance paint in various colors. The different colors highlight the load of each set of springs.
Reference: 3219559
Brand: Malossi
Malossi 3219559 exhaust for Mhr Team 3 racing scooter diameter 47 mm Code: 3219559 Scooter Racing Malossi mufflers have been designed and built with a single goal: to achieve the maximum possible performance in combination with the cylinder for which they were designed. Each evolutionary step of the Malossi exhaust systems is the result of fluid dynamic...
Reference: 143.800.067
Brand: POLINI
Polini 910 S blue minimoto front fender. Polini Code: 143.800.067
Reference: 31 8572
Brand: Malossi
Malossi cylinder diameter 40 in cast iron Malossi code: 31 8572
Reference: 215.0191
Brand: POLINI
Polini intake manifold for Gilera 5000/6000 series. Polini Code: 215.0191
Reference: 11 3745
Brand: Malossi
Complete Malossi gasket kit for 53 diameter cylinder for original head Malossi code: 11 3745
Reference: 143.000.260
Brand: POLINI
Minimoto Polini 910 fairing S engine 6.2 hp Polini single-cylinder 2-stroke engine - aluminum cylinder Bore x stroke: 36 x 39 Displacement 36.69 cc Compression ratio: 16.2: 1 Carburetor: SHA 14-14 Ignition: Inductive discharge electronic Fuel: Unleaded petrol with 2% synthetic oil Intake: With reed valve in the crankcase Starting: Tear-off with...
Reference: FM10141-10
Brand: Formula
Universal front or rear radial brake caliper Formula for minimoto and minicross. Formula Code: FM10141-10 Attention: The color of the caliper may vary depending on the production batch.
Reference: 251.0037
Brand: POLINI
Head gasket Vespa 200 2t. Polini Code: 251.0037
Reference: 01.RA.0023.L
Brand: Ohvale
Front wheel Ohvale bearing till 2020 Code: 01.RA.0023.L
Reference: 143.195.002
Brand: POLINI
Minibike roller cage 10x13x14.5 mm. Roller cage for 10mm gudgeon pin, 13mm outer diameter, 14.5mm length.
Reference: 209.0441
Brand: POLINI
Honda Sh 125 (58 mm) 209.0441 gasket set
Reference: 1119271B
Brand: Malossi
Complete Malossi gasket kit for 63 mm diameter H2O 4T cylinder kit Malossi code: 1119271B
Minibike rim red for Dm Grc Tcm.
Minibike rim with new racing design, entirely machined from solid, 58 mm internal groove section.
Rim compatible with hubs: TCM, DM, GRC and CBM.