- New

Xmotorstore Payments
Ghr flow diverter
GHR flow diverter inserts for VITON reed valve.
CNC machined flow diverters for maximum quality and performance on your minimoto.
Compatible with iame, tcm, and other VITON reed valves.
Available in variants:
Ghr flow diverter 15 mm.
Ghr flow diverter 21 mm.
Ghr flow diverter
GHR flow diverter inserts for VITON reed valve.
CNC machined flow diverters for maximum quality and performance on your minimoto.
Compatible with iame, tcm, and other VITON reed valves.
Available in variants:
Ghr flow diverter 15 mm.
Ghr flow diverter 21 mm.
Reference: GHR 010.001
Brand: GHR
Complete 50cc engine Ghr gasket kit. The kit includes: - Cylinder base gaskets Ghr: 0.05 - 0.10 - 0.20 - 0.50 - Oring studs 5 pcs - Upper and lower dome oring (viton) 1 pc each - Oring head collision 1 pc - Oring viton exhaust 1 pc - Manifold and reed valve gaskets 1 pc each
Reference: GHR 071.024
Brand: GHR
Reed Ghr carbon braided 0.24 high tech
Reference: GHR 071.026
Brand: GHR
Reed Ghr carbon braided 0.26 high tech
Reference: IMG-02000-15
Brand: CS Racing
Reed valve Cs for minimoto. The Cs reed valve pack allows greater performance thanks to the viton coating. Divert flows not included.
Reference: GHR 066.001 - 143.270.016
Brand: GHR
Rubber intake manifold Ghr diameter 21 mm. Specific manifold for minibikes with Ghr engine and phbg carburettor.
Reference: 950.830.034
Brand: POLINI
Hi-Speed e-bike Brose, code 950.830.034 Hi-Speed e-bike for: Brose e-bike, Brose Mag, Brose for specialized, Continental, Continental 36V Magnet code 950.870.001
Reference: 6118634
Brand: Malossi
X Special belt Malossi strap 22.6x10.6x845 mm angle 30 Malossi code: 6118634 Malossi belt for HONDA ADV 150 ie 4T LC 2020->2022 (KF39E) Malossi belt for HONDA PCX 125 ie 4T LC euro 4 2018->2020 (JF64E) Malossi belt for HONDA PCX 150 ie 4T LC euro 4 2018->
Reference: 4319443b
Brand: Malossi
Malossi High Strength Locking Agent LOCTITE 603 Malossi Code: 4319443b Characteristics of the Locking Agent LOCTITE® 603 is a high strength locking agent ideal for fastening cylindrical parts with little play, such as sintered bearings. It polymerizes in the absence of air between metal surfaces in close contact, preventing loosening and leaks caused by...
Reference: 5515740
Brand: Malossi
Malossi 5515740 strobe controller Code: 5515740 This small-sized instrument not only allows the advance to be checked with disarming ease, thanks to a 200 lm flash with a duration of 10 µs and an extremely short delay (<1µs), but it also completely replaces the classic strobe guns, thanks to the its technical characteristics decidedly superior to many...
Reference: 206.0108
Brand: POLINI
Polini segment diameter 43.8x1.5 mm 206.0108 Polini segment for: Gilera, Gilera ALX, Gilera GSA, Gilera Toledo, Gilera Vale, Gilera CBA, Piaggio, Piaggio Bravo, Piaggio Cba, Piaggio Ciao, Piaggio Eco, Piaggio SI, Piaggio Vespino F9, Piaggio Velofax, Polini
Reference: 01.MO.0151.L
Brand: Ohvale
Ohvale Spring locating plateCode: 01.MO.0151.L
Reference: 7007
Brand: STAMAS
Distance internal front hub Stamas factory
Reference: 215.0431
Brand: POLINI
Polini intake manifold for Piaggio Gilera PHBG 19 360 degrees. Polini Code: 215.0431
Reference: 5516731B
Brand: Malossi
Malossi electronic control unit Force Master 2 5516731B Code: 5516731B Malossi Force Master 2 electronic control unit for I tech 4 stroke cylinders. The Force Master ECU allows you to vary the injection to adapt perfectly to the Malossi and original 4 stroke cylinders. Carburation adjustment ± 20% at min/average/max Rev limiter: +1,800 RPM Original 10,000...
Reference: 6215007BB
Brand: Malossi
Malossi approved brake pads Malossi code: 6215007BB Malossi brake pads for Amico 50 2T Front, 1992-. Malossi brake pads for Area 51 50 2T LC Front, 1998-. Rear, 1998-. Malossi brake pads for Gulliver 50 2T Front, 1995-. Malossi brake pads for Gulliver 50 2T LC Front, 1995-. Malossi brake pads for Habana 50 2T Front, 1998-. Malossi brake pads for Leonardo...
Reference: 3217791
Brand: Malossi
Malossi muffler 3217791 Power classic Exhaust Code: 3217791 Even the Vespa PX, the most classic of scooters, sometimes needs a little more panache. And on a classic two-stroke engine the most obvious and simple of the modifications that can be made is the addition of an expansion muffler. Therefore, Malossi technicians have designed an exhaust system from...
Reference: 6618244
Brand: Malossi
Malossi needle cage d.18x24x12.8 complete with shim Malossi code: 6618244
Reference: 03.FA.0117.L
Brand: Ohvale
Mupo Ohvale Gp-2 fork overhaul kit. Ohvale code: 03.FA.0117.L
Reference: 01.PE.0006.L
Brand: Ohvale
Ohvale Gp-0 Gp-2 footboard buffer. Ohvale code: 01.PE.0006.L Nylon footrest pad complete with fixing screw, compatible for: Ohvale Gp-0 footboard buffer. Ohvale Gp-2 footboard buffer.
Reference: GMJB-50
Brand: GIMOTO
Gimoto collection leather motorcycle jacket. Brown leather jacket for motorcyclists with approved shoulder and elbow protectors. Jacket in full-grain cowhide (thickness 1.2 mm – 1.3 mm). CE EN 1621-1 approved protectors on shoulders, elbows. Arrangement for back protection housing. Elastic bellows on shoulders. Air vents. Openwork interior. Retro style...
Ghr flow diverter
GHR flow diverter inserts for VITON reed valve.
CNC machined flow diverters for maximum quality and performance on your minimoto.
Compatible with iame, tcm, and other VITON reed valves.
Available in variants:
Ghr flow diverter 15 mm.
Ghr flow diverter 21 mm.