Xmotorstore Payments
Racing Malossi multiple gear (z10-15-18-20) 6716207
Malossi code: 6716207.
Malossi designers have studied two different ratios for second, third and fourth gear, calculated specifically for engines more focused on torque, in the Sport version 6716696 (Z10-14-17-20 cal15), or for engines prepared for the track, in the Racing version 6716207 (Z10-15-18-20 cal 15).
The Malossi multiple gear is perfectly interchangeable with the original and does not require any modification to its housing. Furthermore, thanks to the obsessive search for the correct sizing of the tooth, it is able to work perfectly in combination with all the other gears. The choice of this precise module, in fact, has made it possible to keep the wheelbase unchanged. This high-quality technical solution guarantees considerable reliability and a significant reduction in gearbox noise.
TECHNICAL CHARACTERISTICS
- The Malossi Vespa multiple gear is made exclusively with materials that exceed the very strict standards imposed by our technicians and systematically verified with very strict tests and trials.
-The final processing is performed on numerically controlled machines, after which the Malossi multiple gear is subjected to a complete thermochemical cementation treatment at 900°C, which gives it the required hardness and resistance.
-The size and quality of the finished gear are finally verified on Zeiss three-dimensional control machines.
Racing Malossi multiple gear for:
Racing Malossi multiple gear for Vespa Et3 Primavera 125 2t.
Racing Malossi multiple gear for Vespa Ets 125 2t.
Racing Malossi multiple gear for Vespa Pk 125 2t.
Racing Malossi multiple gear for Vespa Pk 50 2t.
Racing Malossi multiple gear for Vespa Pk Fl 125 2t.
Racing Malossi multiple gear for Vespa Pk Fl 50 2t.
Racing Malossi multiple gear for Vespa Pk Hp Fl 50 2t.
Racing Malossi multiple gear for Vespa Pk Xl 125 2t.
Racing Malossi multiple gear for Vespa Pk Xl 50 2t.
Racing Malossi multiple gear change for Vespa Primavera 125 2t.
Racing Malossi multiple gear change for Vespa Special 50.
Reference: 4024
Brand: STAMAS
Cnc hydraulic support for rear caliper factory Stamas
Reference: 251.0031
Brand: POLINI
Or series Polini cylinder head dome diameter 47-47.6 mm. Polini Code: 251.0031
Reference: 0413258
Brand: Malossi
Malossi red filter e15 air filter with 60 mm inlet for threaded carburetors. Malossi code: 0413258 E15 filters: The great novelty of these new Red Filters is the absence of a rigid structure that makes them adaptable to any assembly requirement. E15 air filters: with self-extinguishing expanded polyurethane filter element applicable to Dellorto, Mikuni,...
Reference: 01.TE.0020.L
Brand: Ohvale
Ohvale 110 automatic engine front fixing. Ohvale code: 01.TE.0020.L
Reference: 6280.82.52.06-0
Brand: Domino
Domino trial grips 6280.82.52.06-0 Material: Thermoplastic rubber Color: Grey Length: 126-130 mm End: Closed Handlebar / Gas tube diameter: 22/26 mm Grooves for iron wire: 3 slots Flange diameter: 48 mm Handle diameter Knob mounted: 30 mm
Reference: 3218255.k0
Brand: Malossi
Malossi RX BLACK exhaust approved for Honda Forza Malossi code: 3218255.k0 Malossi exhaust for Honda Forza 300 ie 4T LC euro 4 2018 2020 NF07E.
Reference: 210.0070
Brand: POLINI
Polini stroke 54 crankshaft for Vespa 125 Primavera Et3. Polini code: 210.0070
Reference: 4613598
Brand: Malossi
Malossi Rs24 4613598 rear shock absorber for Yamaha T Max Malossi code: 4613598 Malossi rear Rs24 shock absorber, wheelbase 316 mm. -Oleopneumatic suspension with pressurized nitrogen chambers. -Hydraulic extension adjustment. -Patented spring preload adjustment. - Vehicle trim adjustment. -Stroke 48 mm. -Outer sheath in ergal 55 with cobalt blue anodic...
Reference: 3213491
Brand: Malossi
Malossi SUPERMOTO MHR REPLICA exhaust approved for Aprilia Malossi code: 3213491 Malossi exhaust for APRILIA RX 50 2T LC 2007 (DERBI D50B0). The "TYPE" only specifies for which model the approval is valid, it does not limit its assembly. Malossi exhaust for APRILIA SX 50 2T LC 2007 (DERBI D50B0). The "TYPE" only specifies for which model the approval is...
Reference: 3116160
Brand: Malossi
Malossi MHR TEAM cylinder diameter 47.6 in H2O aluminum for modular head Malossi code: 3116160
Reference: 211.0306
Brand: POLINI
Piaggio Gilera head diameter 47 mm h2o. Polini Code: 211.0306 Complete Polini cylinder head for: Aprilia, Aprilia Sr 50, Derbi, Derbi GP1 50, Gilera, Gilera Dna 50, Gilera Runner 50, Piaggio, Piaggio Extrem Lc, Piaggio MC2 50, Piaggio NRG, Piaggio Quartz, Piaggio ZIP 50, Polini
Reference: 204.0906/D
Brand: POLINI
Polini XP4 piston diameter 52 mm selection D Polini piston for: Polini, Polini XP4T 110 2 valves
Reference: GP520SRO6120
Brand: EK (Enuma Chain)
520 pitch motorcycle chain model GP520SRO6120. SRO6 series 120-link chain with 520 pitch suitable for motorcycles with a maximum displacement of: 650 cc combined with an MLJ joint (Joint to be riveted).
Reference: 01.OT.0330.L
Brand: Ohvale
Clutch protection Civ Ohvale Gp-0 110 4s 01.OT.0330.L Code: 01.OT.0330.L Clutch side protection kit Ohvale Gp-0 110 4s for the Italian "Civ" championship Clutch protection Civ Ohvale Gp-0 110 4s
Reference: 119.0093
Brand: POLINI
Polini thermal group minicross XP4 107 cc diameter 52 mm 2 valves. Polini Code: 119.0093
Reference: 143.630.003
Brand: POLINI
Mechanical rear brake caliper support columns for Polini 910 minimoto. Polini code: 143.630.003
Racing Malossi multiple gear (z10-15-18-20) 6716207
Malossi code: 6716207.
Malossi designers have studied two different ratios for second, third and fourth gear, calculated specifically for engines more focused on torque, in the Sport version 6716696 (Z10-14-17-20 cal15), or for engines prepared for the track, in the Racing version 6716207 (Z10-15-18-20 cal 15).
The Malossi multiple gear is perfectly interchangeable with the original and does not require any modification to its housing. Furthermore, thanks to the obsessive search for the correct sizing of the tooth, it is able to work perfectly in combination with all the other gears. The choice of this precise module, in fact, has made it possible to keep the wheelbase unchanged. This high-quality technical solution guarantees considerable reliability and a significant reduction in gearbox noise.
TECHNICAL CHARACTERISTICS
- The Malossi Vespa multiple gear is made exclusively with materials that exceed the very strict standards imposed by our technicians and systematically verified with very strict tests and trials.
-The final processing is performed on numerically controlled machines, after which the Malossi multiple gear is subjected to a complete thermochemical cementation treatment at 900°C, which gives it the required hardness and resistance.
-The size and quality of the finished gear are finally verified on Zeiss three-dimensional control machines.
