- Reduced price
- New

Xmotorstore Payments
Malossi Maxi wing finned clutch bell 7715582B
Malossi code: 7715582B.
Malossi Maxi Wing finned clutch bell.
Internal diameter 160 mm.
External diameter 180 mm.
Weight 1664 grams.
The anti-explosion thermal clutch bells are equipped with a finned reinforcement ring for the dissipation of heat which develops mainly during starts from a standstill and when the vehicle accelerates from low speeds.
This is a technological innovation derived from research carried out in the context of scooter competitions.
Here is the principle on which it is based:
the greater radiating surface considerably lowers the operating temperature of the bell, considerably increasing the life of the clutch unit.
The clutch unit is enormously stressed when driving around town, when starting uphill and when exiting tight hairpin bends with two people on board.
Here, to safeguard your clutch, Malossi has developed the Maxi Wing Clutch Bell.
It should not be overlooked that the finned reinforcement ring is even an anti-explosion element, as it has been designed to resist the high rotation speeds imposed by sporty driving, especially if the engine has been tuned, taking into account that the force spin increases squarely as the rpm increases.
Technical features:
-Bell made of mild steel sheet for deep drawing.
-Hub in special turned, welded and broached steel.
-Workplace turned within very strict values.
-Total dynamic balancing.
-Soft nitriding heat treatment.
Malossi clutch bell for:
Malossi clutch bell for MBK Evolis 400 ie 4T LC.
Malossi clutch bell for Yamaha Majesty 400 4T LC <-2008 (H317E).
Malossi clutch bell for Yamaha Majesty 400 4T LC euro 3 2009-> (H322E).
Malossi clutch bell for Yamaha X Max 400 ie 4T LC euro 3 <-2016 (H330E).
Malossi clutch bell for Yamaha X Max 400 ie 4T LC euro 4 2017->2019 (H340E).
Malossi clutch bell for Yamaha X Max Tech Max 400 ie 4T LC euro 4 2019->2021 (H340E).
Reference: 133.1008
Brand: POLINI
Polini cylinder kit for Minarelli Am6 diameter 50 mm h2o. Polini Code: 133.1008
Reference: 215.0406
Brand: POLINI
Piaggio Zip intake manifold for original carburettor. Polini Code: 215.0406
Reference: 1610649
Brand: Malossi
Malossi shb 16 rigid fuel system on the crankcase for Vespa Code: 1610649 Application: Malossi fuel system for Vespa PK 50 2T Malossi fuel system for Vespa PK FL 50 2T
Reference: 206.0349
Brand: POLINI
Polini segment diameter 39.88X1.2 mm chromed. 206.0349
Reference: 5513400
Brand: Malossi
Malossi Tc Unit Rpm control electronic control unit 5513400 for Malaguti Malossi code: 5513400 Tc Unit Rpm control electronic control unit TC UNIT R.P.M. CONTROL These control units have a microswitch, which can be positioned as desired on your vehicle in a sheltered place, which activates the rev limiter of your engine. The number of revolutions at which...
Reference: 129
Brand: DM
New DM minimoto front brake disc. The new Grimeca disc for Dm guarantees better performance and reliability than previous versions, the new design was created to improve the braking performance of your DM mini-bike in every aspect. Ideal for use with oversized sintered pads. Weight: 215g Thickness: 2.5cm
Reference: 6115760B
Brand: Malossi
Malossi movable half-pulley for MULTIVAR scooter-atv-quad Malossi code: 6115760B
Reference: 209.0473
Brand: POLINI
Polini gaskets series diameter 72 mm (leading air motor) 209.0473 Code: 209.0473 Polini gasket set for: Benelli, Benelli Adiva 125, Benelli Adiva 150, Derbi, Derbi Boulevard 125, Derbi Boulevard 150, Italjet, Italjet Jet Set 125, Italjet Jet Set 150, Italjet Torpedo 125, Italjet Torpedo 150, Piaggio, Piaggio Fly 125 , Piaggio Fly 150, Piaggio Liberty 125,...
Reference: 4517457
Brand: Malossi
Malossi Sport windshield for Kymco 4517457 Malossi code: 4517457. Dark smoke colored screen. Length 50 cm. Height 47 cm. Thickness 0.3 cm.
Reference: 140.0092
Brand: POLINI
Polini cylinder kit for Piaggio Ape diameter 69 mm, pin diameter 18 mm. Polini Code: 140.0092 Piaggio cylinder kit for: Piaggio, Piaggio Ape Tm 703, Piaggio Ape Tm P602 Cast iron cylinder
Reference: GHR 045.001
Brand: GHR
Minimoto bell 80mm M10 Ghr. The 80 mm diameter minimoto bell with M10 pinion thread is compatible with Cs, Ghr, Iame, Bzm bell casings.
Reference: 5518372
Brand: Malossi
Malossi Vespower ignition with 20 mm diameter cone Malossi Code: 5518372 Malossi Vespower ignition with 20 mm diameter cone and 1.2 kg flywheel Complete ignition line for the entire vintage Vespa range with gears. To allow a perfect and easy installation, a specific version has been studied for each model. The ignition is distinguished by: - Lightened...
Reference: 03.CA.0006.G
Brand: Ohvale
Ohvale Rear fender unpainted Code: 03.CA.0006.G
Reference: 248.042
Brand: POLINI
Polini variator belt for Peugeot 100 in Aramid Code 248.042 Application: Peugeot, Peugeot Looxor 100, Peugeot Speedfight 100, Peugeot Trekker 100, Peugeot Vivacity 100, Peugeot X-Fight 100, Peugeot X-Team 100, Peugeot Elyseo 100
Reference: 1117769
Brand: Malossi
Complete Malossi gasket kit for 63 diameter cylinder for original head Malossi code: 1117960B
Reference: 01.SE.0025.L
Brand: Ohvale
Screw TCEI thin height Ohvale M6x12 Code: 01.SE.0025.L
Malossi Maxi wing finned clutch bell 7715582B
Malossi code: 7715582B.
Malossi Maxi Wing finned clutch bell.
Internal diameter 160 mm.
External diameter 180 mm.
Weight 1664 grams.
The anti-explosion thermal clutch bells are equipped with a finned reinforcement ring for the dissipation of heat which develops mainly during starts from a standstill and when the vehicle accelerates from low speeds.
This is a technological innovation derived from research carried out in the context of scooter competitions.
Here is the principle on which it is based:
the greater radiating surface considerably lowers the operating temperature of the bell, considerably increasing the life of the clutch unit.
The clutch unit is enormously stressed when driving around town, when starting uphill and when exiting tight hairpin bends with two people on board.
Here, to safeguard your clutch, Malossi has developed the Maxi Wing Clutch Bell.
It should not be overlooked that the finned reinforcement ring is even an anti-explosion element, as it has been designed to resist the high rotation speeds imposed by sporty driving, especially if the engine has been tuned, taking into account that the force spin increases squarely as the rpm increases.
Technical features:
-Bell made of mild steel sheet for deep drawing.
-Hub in special turned, welded and broached steel.
-Workplace turned within very strict values.
-Total dynamic balancing.
-Soft nitriding heat treatment.