- Reduced price
- New

Xmotorstore Payments
Malossi Maxi wing finned clutch bell 7719143B
Malossi code: 7719143B.
Malossi Maxi Wing finned clutch bell.
Internal diameter 150 mm.
Weight 1445 grams.
The anti-explosion thermal clutch bells are equipped with a finned reinforcement ring for the dissipation of heat which develops mainly during starts from a standstill and when the vehicle accelerates from low speeds.
This is a technological innovation derived from research carried out in the context of scooter competitions.
Here is the principle on which it is based:
the greater radiating surface considerably lowers the operating temperature of the bell, considerably increasing the life of the clutch unit.
The clutch unit is enormously stressed when driving around town, when starting uphill and when exiting tight hairpin bends with two people on board.
Here, to safeguard your clutch, Malossi has developed the Maxi Wing Clutch Bell.
It should not be overlooked that the finned reinforcement ring is even an anti-explosion element, as it has been designed to resist the high rotation speeds imposed by sporty driving, especially if the engine has been tuned, taking into account that the force spin increases squarely as the rpm increases.
Technical features:
-Bell made of mild steel sheet for deep drawing.
-Hub in special turned, welded and broached steel.
-Workplace turned within very strict values.
-Total dynamic balancing.
-Soft nitriding heat treatment.
Malossi clutch bell for:
Malossi clutch bell for Honda ADV 350 ie 4T LC euro 5 2021-> (NF13E).
Malossi clutch bell for Honda Forza 350 ie 4T LC euro 5 2021-> (NF09E).
Malossi clutch bell for Honda SH I 350 ie 4T LC euro 5 2021->2022 (NF11E).
Malossi clutch bell for Honda SH I 350 ie 4T LC euro 5 2023-> (NF11E).
Reference: 174.2018
Brand: POLINI
Polini sintered brake pads 53.4x44x6x8.7 mm Code: 174.2017 Application: Suzuki, Suzuki Burgman / Skywawe 250/400 X, K3, K6, Sym, Sym Gts, Sym Rv 250, Sym Gts 125 Joymax / 125i Evo, Sym Joymax 125i 4T
Reference: 1023
Brand: STAMAS
Water tank support bracket for sr race factory Stamas frame
Reference: 209.0236
Polini gaskets series Polini gasket set for: Honda, Honda Vision 50, Peugeot, Peugeot ST 50 Rapido, Polini
Reference: 251.0033
Brand: POLINI
Or series dome cylinder head Polini Big evo 52 mm. Polini Code: 251.0033
Reference: 01.SD.0121.L
Brand: Ohvale
Ohvale Tensioner cam chain comp 190/212 Code: 01.SD.0121.L
Reference: 242.410
Brand: POLINI
Polini 16X13 Piaggio roller kit. Available: 242.410 KIT ROLLS 16X13 GR. 2.5-3-3.5-4 242.411 KIT ROLLS 16X13 GR. 3.5-4-4.5-5 242.412 KIT ROLLS 16X13 GR. 4.5-5-5.5-6 242.413 KIT ROLLS 16X13 GR. 5.5-6-6.5-7 242.414 KIT ROLLS 16X13 GR. 6.5-7-8-9
Reference: 6712497
Brand: Malossi
Malossi helical primary gears z 14 / 45 for Honda 6712497 Malossi code: 6712497. Malossi helical primary gears z 14 / 45 Honda. The new HTQ gears have been designed and manufactured with straight/helical teeth to minimize friction losses and stress on the supports. Furthermore, our gears optimize the ratio allowing you to exploit all the power delivered...
Reference: 01.PE.0008.L
Brand: Ohvale
Rear master cylinder support GP-0. Ohvale code: 01.PE.0008.L Specific support for Ohvale GP-0. Compatible with: 110A, 110 4S, 160 4S, 190 Daytona, 190 EVO. Warning: not compatible with 110 and 160 EVO.
Reference: 61 9020B
Brand: Malossi
Malossi mobile half-pulley for MULTIVAR 2000 variator Malossi code: 61 9020B
Reference: 31 8466
Brand: Malossi
Malossi MHR REPLICA cylinder kit diameter 47 in aluminum with pin diameter 12 H2O Malossi code: 31 8466 Malossi cylinder kit for APRILIA SR (carb.) 50 2T LC from 2004 onwards (PIAGGIO). Malossi cylinder kit for APRILIA SR R (carb.) 50 2T LC (PIAGGIO). Malossi cylinder kit for APRILIA SR R 50 2T LC euro 4 from 2018 onwards (PIAGGIO CA81M). For the correct...
Reference: 200.0279
Brand: POLINI
Polini muffler for Mbk Booster evolution 2 70cc. Polini Code: 200.0279. Attention the Polini evolution muffler can only be mounted by removing the stand.
Reference: 209.0310
Brand: POLINI
Polini gasket series diameter 46 mm 209.0310 Polini gasket set for: Motobecane, Motobecane 51, Motobecane 92GT, Motobecane M16, Polini Code: 209.0310
Reference: 144.830.009
Brand: POLINI
Polini XP4S 125 right start switch Code : 144.830.009
Reference: 01.SZ.0414.L
Brand: Ohvale
Ohvale Sleeve clutch Code: 01.SZ.0414.L
Reference: 31 8693
Brand: Malossi
Malossi cylinder diameter 57.5 in cast iron for Piaggio Ape 50 / Vespa PK - PK HP - PK XL - Special 50 cc Malossi code: 31 8693
Malossi Maxi wing finned clutch bell 7719143B
Malossi code: 7719143B.
Malossi Maxi Wing finned clutch bell.
Internal diameter 150 mm.
Weight 1445 grams.
The anti-explosion thermal clutch bells are equipped with a finned reinforcement ring for the dissipation of heat which develops mainly during starts from a standstill and when the vehicle accelerates from low speeds.
This is a technological innovation derived from research carried out in the context of scooter competitions.
Here is the principle on which it is based:
the greater radiating surface considerably lowers the operating temperature of the bell, considerably increasing the life of the clutch unit.
The clutch unit is enormously stressed when driving around town, when starting uphill and when exiting tight hairpin bends with two people on board.
Here, to safeguard your clutch, Malossi has developed the Maxi Wing Clutch Bell.
It should not be overlooked that the finned reinforcement ring is even an anti-explosion element, as it has been designed to resist the high rotation speeds imposed by sporty driving, especially if the engine has been tuned, taking into account that the force spin increases squarely as the rpm increases.
Technical features:
-Bell made of mild steel sheet for deep drawing.
-Hub in special turned, welded and broached steel.
-Workplace turned within very strict values.
-Total dynamic balancing.
-Soft nitriding heat treatment.