Xmotorstore Payments
Malossi Maxi wing finned clutch bell 7717866B
Malossi code: 7717866B.
Maxi wing finned clutch bell internal diameter 125 mm.
External diameter 141.2 mm.
Weight 950 grams.
The anti-explosion thermal clutch bells are equipped with a finned reinforcement ring for the dissipation of heat which develops mainly during starts from a standstill and when the vehicle accelerates from low speeds.
This is a technological innovation derived from research carried out in the context of scooter competitions.
Here is the principle on which it is based:
the greater radiating surface considerably lowers the operating temperature of the bell, considerably increasing the life of the clutch unit.
The clutch unit is enormously stressed when driving around town, when starting uphill and when exiting tight hairpin bends with two people on board.
Here, to safeguard your clutch, Malossi has developed the Maxi Wing Clutch Bell.
It should not be overlooked that the finned reinforcement ring is even an anti-explosion element, as it has been designed to resist the high rotation speeds imposed by sporty driving, especially if the engine has been tuned, taking into account that the force spin increases squarely as the rpm increases.
Technical features:
-Bell made of mild steel sheet for deep drawing.
-Hub in special turned, welded and broached steel.
-Workplace turned within very strict values.
-Total dynamic balancing.
-Soft nitriding heat treatment.
Malossi clutch bell for:
Malossi clutch bell for MBK Ocito 125 ie 4T euro 3.
Malossi clutch bell for Yamaha Aerox 155 ie 4T LC 2017->.
Malossi clutch bell for Yamaha BW's 125 ie 4T LC euro 4 2019->.
Malossi clutch bell for Yamaha Cygnus Gryphus 125 ie 4T LC euro 4 2019->.
Malossi clutch bell for Yamaha N Max 125 ie 4T LC euro 3 <-2016 (E3S3E).
Malossi clutch bell for Yamaha N Max 125 ie 4T LC euro 4 2017->2020 (E3X7E).
Malossi clutch bell for Yamaha N Max 125 ie 4T LC euro 5 2021-> (E32TE).
Malossi clutch bell for Yamaha N Max 155 ie 4T LC euro 3 <-2016.
Malossi clutch bell for Yamaha N Max 155 ie 4T LC euro 4 2017->.
Malossi clutch bell for Yamaha NVX 155 ie 4T LC euro 4 2017->.
Malossi clutch bell for Yamaha Tricity 125 ie 4T LC euro 4 2017-> (E3V8E).
Malossi clutch bell for Yamaha Tricity 155 ie 4T LC euro 4 2017-> (G3H3E).
Malossi clutch bell for Yamaha X Max 125 ie 4T LC euro 5 2021->2022 (E33FE).
Malossi clutch bell for Yamaha N Max 155 ie 4T LC euro 5 2023-> (G3N9E).
Malossi clutch bell for Yamaha Tricity 155 ie 4T LC euro 5 2022-> (G3T3E).
Malossi clutch bell for Yamaha Tricity 125 ie 4T LC euro 5 2023-> (E34AE).
Reference: 3214798B
Brand: Malossi
Malossi 3214798B exhaust manifold for Rx muffler Code: 3214798B Malossi exhaust manifold for Rx muffler
Reference: 249.052
Brand: POLINI
Polini clutch jaws for Gilera Gp 800-Aprilia Srv 850 adjustable Code: 249.052 Weight: 1990 gr. Application: Gilera, Gilera GP 800, Aprilia, Aprilia Srv 850 ie 4T
Reference: 001002SP004A
Brand: DM
Pair of Dm aluminum handlebars for 25 mm stems. The handlebars for Dm mini bikes are made of aluminum. Collar attachment hole distance: 31 mm. Handlebar diameter Dm: 22 mm. Attention: The color of the Dm semi-dumbbells may vary according to the production batch.
Reference: 143.405.004
Brand: POLINI
Reed valve for Polini reverse engine. Polini code: 143.405.004
Reference: A2151
Brand: Alfano
Exhaust K sensor for thermocouple A2151. 40cm "K" exhaust sensor "Professional quality, red label". This K thermocouple technology sensor must be installed on the exhaust pipe. Read the explanation on installing and using this sensor, this document is located under the heading SUPPORT Note: This sensor must be used with an A3401 extension cable or A2190 hub.
Reference: 200.0127
Brand: POLINI
Exhaust Polini for Piaggio Ape 50, 200.0127 Code Exhaust Polini for Piaggio, Piaggio Ape 50
Reference: 31 7137
Brand: Malossi
Malossi cylinder diameter 47 in cast iron with pin diameter 10 Malossi code: 31 7137 Malossi cylinder for Aprilia Habana 50 2T also adaptable to the original head. Malossi cylinder for Aprilia Mojito 50 2T also adaptable to the original head. Malossi cylinder for Atala Hacker 50 2T also adaptable to the original head. Malossi cylinder for Italjet Formula...
Reference: 5519633
Brand: Malossi
Malossi ignition with internal rotor Mhr Team II Malossi Code: 5519633 Malossi ignition for Drr Drx 90 2016 The MHR Team II range is equipped with a non-remappable variable advance control unit with 3 trimmers: -the first (MAPS) to determine the advance map selection - the second (OFFSET) allows you to move the selected map + or - 2 ° - the third (LIM)...
Reference: 5517175
Brand: Malossi
Malossi Vespower ignition with cone diameter 20 mm Malossi Code: 5517175 Malossi Vespower ignition with 20 mm diameter cone and 1.2 kg flywheel Complete ignition line for the entire vintage Vespa range with gears. To allow a perfect and easy installation, a specific version has been studied for each model. The ignition is distinguished by: - Lightened...
Reference: 203.0029
Brand: POLINI
Polini evolution 90 degree air box. Polini code: 203.0029 Polini evolution 90 degree air box measurements: Inlet: 38mm Length: 175mm Outside diameter: 80mm
Reference: 3219559
Brand: Malossi
Malossi 3219559 exhaust for Mhr Team 3 racing scooter diameter 47 mm Code: 3219559 Scooter Racing Malossi mufflers have been designed and built with a single goal: to achieve the maximum possible performance in combination with the cylinder for which they were designed. Each evolutionary step of the Malossi exhaust systems is the result of fluid dynamic...
Reference: 01.OT.0341.L
Brand: Ohvale
Ohvale Lower fairing cap Code: 01.OT.0341.L
Reference: 241.626
Brand: POLINI
Polini Variator for Honda 50 Zoomer 4T Code: 241.626 Application: Variator for Honda, Variator for Honda Ruckus 50, Variator for Honda Zoomer 50, Variator for Honda Metropolitan 50 4T, Variator for Honda Dio Z4 4T
Reference: 01.OT.0103.L
Brand: Ohvale
Ohvale Gp-0 Gp-2 radiator spacer. Ohvale code: 01.OT.0103.L
Reference: 200.0400
Brand: POLINI
Vespa 125 primavera et3 evolution turned muffler, code 200.0400 Exhaust for Vespa: Vespa, Vespa 125 2t spring, spring Vespa 125 et3 The exhaust is mounted only with the cylinder turned, with slightly modified frame and without the start lever. The exhaust is not painted
Malossi Maxi wing finned clutch bell 7717866B
Malossi code: 7717866B.
Maxi wing finned clutch bell internal diameter 125 mm.
External diameter 141.2 mm.
Weight 950 grams.
The anti-explosion thermal clutch bells are equipped with a finned reinforcement ring for the dissipation of heat which develops mainly during starts from a standstill and when the vehicle accelerates from low speeds.
This is a technological innovation derived from research carried out in the context of scooter competitions.
Here is the principle on which it is based:
the greater radiating surface considerably lowers the operating temperature of the bell, considerably increasing the life of the clutch unit.
The clutch unit is enormously stressed when driving around town, when starting uphill and when exiting tight hairpin bends with two people on board.
Here, to safeguard your clutch, Malossi has developed the Maxi Wing Clutch Bell.
It should not be overlooked that the finned reinforcement ring is even an anti-explosion element, as it has been designed to resist the high rotation speeds imposed by sporty driving, especially if the engine has been tuned, taking into account that the force spin increases squarely as the rpm increases.
Technical features:
-Bell made of mild steel sheet for deep drawing.
-Hub in special turned, welded and broached steel.
-Workplace turned within very strict values.
-Total dynamic balancing.
-Soft nitriding heat treatment.
