Polini 19 carburettor for Vespa 125 Primavera ET3 with filter

Reference: 02 1827

Brand: Malossi

Pair of Malossi collector 36 mm for Guzzi Vt 750 cc 02 1827

Pair of Malossi collector 36 mm for Guzzi Vt 750 cc, 850 cc T3, 850 cc Le Mans. Malossi code: 02 1827. For PHF 36 carburetor

Reference: 213.0605

Brand: POLINI

Carbon sheets 110X100mm thickness 0.33mm 213.0605

Carbon sheets 110X100mm thickness 0.33mm. Carbon plates to cut out for slats. Polini Code: 213.0605

Reference: 01.AS.0052.L

Brand: Ohvale

Ohvale Mesh filter D.38 01.AS.0052.L

Ohvale Mesh filter D.38 Code: 01.AS.0052.L

Reference: 213.0536

Brand: POLINI

Polini carbon reeds set 39x32 mm 0.30 and 0.35 mm 213.0536

Polini carbon reeds set 39x32 mm 0.30 and 0.35 mm for Piaggio 50cc. Polini Code: 213.0536

Reference: 9450x80

Brand: DELLORTO

Float 4 grams PHBG Dellorto

4 gr float for Dellorto PHBG carburetors. Dellorto replacement suitable for: Float for Phbg 15 Float for Phbg 18 Float for Phbg 19 Float for Phbg 21 Dellorto Code: 9450x80

Reference: 223.0123

Brand: POLINI

Rubber suction sleeve diameter 28.5 mm length 37 mm

Rubber suction sleeve diameter 28.5 mm length 37 mm. Polini Code: 223.0123

Brand: POLINI

Jet maximum Polini Cp - Keihin - Pwk (from 120 to 198)

Jet maximum Polini Cp - Keihin - Pwk

Reference: 1610703

Brand: Malossi

Malossi phbg 21 as fuel system for Honda 50cc 1610703

Malossi phbg 21 as fuel system for Honda 50cc 1610703 Malossi code: 1610703 Application: Malossi fuel system for Honda MB 5 (gears) 50 Malossi fuel system for Honda MT 5 (speed) 50 2T Malossi fuel system for Honda MTX 5 (speed) 50 2T

Reference: 02 1783

Brand: Malossi

Malossi rear intake manifold for Ducati Replica 900cc 02 1783

Malossi rear intake manifold for Ducati Replica 900cc. Measurements: 40 mm. Malossi Code: 02 1783

Reference: 5519539

Brand: Malossi

Malossi Force master 2.1 electronic control unit 5519539 for Honda

Malossi Force master 2.1 electronic control unit 5519539 for Honda Malossi code: 5519539 The Force Master 2.1 ECU is much easier to configure. Making products more ergonomic and simple to use has always been a Malossi objective: Force Master 2.1 is a contemporary, adequate and super performing product. With an interface for the K and CAN communication...

Reference: 03.AS.0070.L

Brand: Ohvale

Rain cover for Ohvale air filter 03.AS.0070.L

Rain cover for Ohvale air filter. Ohvale part number: 03.AS.0070.L Ohvale has produced a dedicated rain cover for the air filter for models using the Dell'orto PHBH 28 and PHBL 24 carburettor. The Rain Cover was developed with the aim of protecting the air filter and reducing its exposure and any water infiltration due to extreme wet track conditions....

Reference: 203.0134

Brand: POLINI

Piaggio Beverly 125cc air filter 203.0134

Piaggio Beverly 125cc air filter. Polini Code: 203.0134

Reference: 01.AS.0258.L

Brand: Ohvale

Ohvale Inlet mainfold fix band 110 4S EVO 01.AS.0258.L

Ohvale Inlet mainfold fix band 110 4S EVO Code: 01.AS.0258.L

Reference: 02 1782

Brand: Malossi

Malossi front intake manifold for Ducati Replica 900cc 02 1782

Malossi front intake manifold for Ducati Replica 900cc. Measures 40X45X73 mm. Malossi Code: 02 1782

Reference: 215.0410

Brand: POLINI

Intake manifold big valve Mbk Booster 21/25mm 215.0410

Intake manifold big valve Mbk Booster 21 / 25mm. Polini Code: 215.0410

Reference: 5519935b

Brand: Malossi

Lambda emulator Malossi Tc Unit O2 controller 5519935b

Lambda emulator Malossi Tc Unit O2 controller 5519935b Malossi code: 5519935b The Malossi Lambda emulator is a device capable of simulating the lambda probe signals that the original vehicle control unit expects to receive. In this way, the original lambda probe is used to obtain optimal carburetion, without the original control unit detecting faults or...