Reference: A4462
Brand: Alfano
Magnetic ring for speed sensor Alfano A4462
Magnetic ring for speed sensor Alfano A4462. Magnetic ring for speed sensor diameter 50mm. One magnet ring for 50mm diameter axis for A2201 speed sensor
Xmotorstore Payments
There are 64 products.
Reference: A4462
Brand: Alfano
Magnetic ring for speed sensor Alfano A4462. Magnetic ring for speed sensor diameter 50mm. One magnet ring for 50mm diameter axis for A2201 speed sensor
Reference: A4461
Brand: Alfano
Alfano ring with 4 magnets for 50 mm axis. Alfano Code: A4461. Ring with 4 magnets for the speed sensor 50mm. Ring with 4 magnets for axis diameter 50mm for speed sensor A2201. Note: This ring allows for a reaction on the pick up at 4x faster speeds.
Reference: A2203
Brand: Alfano
Alfano speed sensor 195 cm. Code A2203. New model (10-03-2019), this speed sensor can be installed directly on the Alfano 6 and on the PROIIIevo (in the green connector), without the need to use the A2192 (old model) or A2194 Hub. This sensor can be used on the rear axle or the front wheel of the kart. Note: For those who need an extension cable to...
Reference: A4100
Brand: Alfano
I.R. transmitter Alfano A4100. This coded infrared transmitter is used to operate the infrared receiver Item A1401 to take the times. It is connected to a 12 volt direct current source.
Reference: A1411
Brand: Alfano
Alfano infrared sensor USA version A1411. INFRARED sensor USA version 40cm. Designed to read encoded infrared rays from transmitters installed in the USA Note: this item is delivered in the box with the PROIIIevo, ref, A1022 For more information, contact the factory.
Reference: A1401
Brand: Alfano
Alfano A1401 infrared sensor. 40cm infrared sensor. Designed for reading the encoded infrared rays of ALFANO transmitters, ref. A4100 Note: this article is delivered in the box with the PROIIIevo, ref. A1021
Reference: A3501
Brand: Alfano
Extension 250 mm for Alfano magnetic sensor A3501
Reference: A1302
Brand: Alfano
Alfano magnetic sensor 90cm. Designed to pick up magnetic tapes installed on circuits. Please note: this item comes in the box with the PROIIIevo. Option for ALFANO6
Reference: A4540
Brand: Alfano
Alfano 6 data and charging cable. Alfano code: A4540. USB cable to download data from the ALFANO 6, also to charge the battery of the Alfano 6.
Reference: A4510
Brand: Alfano
Alfano 6 battery charger cable. Alfano code: A4510. Cable to charge the ALFANO6 battery (The cable is supplied as standard with the ALFANO6 upon purchase). Warning: this cable does not work for data download.
Reference: A3406
Brand: Alfano
Special cable 200 cm for 0-5V sensor connections, must be connected to the Lambda input of Box12 A1160. Yellow wire = Ground (GND) Red wire = + 5V Green wire = Sensor signal from 0 to + 5V
Reference: A2401
Brand: Alfano
Alfano steering wheel position sensor. Alfano Code A2401. 80cm FLYING position sensor. This potentiometer sensor is used to measure the position of the steering wheel. Designed for the module: Box12 / Box4Move.