Xmotorstore Payments
There are 50 products.
Reference: A4100
Brand: Alfano
I.R. transmitter Alfano A4100. This coded infrared transmitter is used to operate the infrared receiver Item A1401 to take the times. It is connected to a 12 volt direct current source.
Reference: A1411
Brand: Alfano
Alfano infrared sensor USA version A1411. INFRARED sensor USA version 40cm. Designed to read encoded infrared rays from transmitters installed in the USA Note: this item is delivered in the box with the PROIIIevo, ref, A1022 For more information, contact the factory.
Reference: A1401
Brand: Alfano
Alfano A1401 infrared sensor. 40cm infrared sensor. Designed for reading the encoded infrared rays of ALFANO transmitters, ref. A4100 Note: this article is delivered in the box with the PROIIIevo, ref. A1021
Reference: A3501
Brand: Alfano
Extension 250 mm for Alfano magnetic sensor A3501
Reference: A1302
Brand: Alfano
Alfano magnetic sensor 90cm. Designed to pick up magnetic tapes installed on circuits. Please note: this item comes in the box with the PROIIIevo. Option for ALFANO6
Reference: A4540
Brand: Alfano
Alfano 6 data and charging cable. Alfano code: A4540. USB cable to download data from the ALFANO 6, also to charge the battery of the Alfano 6.
Reference: A4510
Brand: Alfano
Alfano 6 battery charger cable. Alfano code: A4510. Cable to charge the ALFANO6 battery (The cable is supplied as standard with the ALFANO6 upon purchase). Warning: this cable does not work for data download.
Reference: A3406
Brand: Alfano
Special cable 200 cm for 0-5V sensor connections, must be connected to the Lambda input of Box12 A1160. Yellow wire = Ground (GND) Red wire = + 5V Green wire = Sensor signal from 0 to + 5V
Reference: A2401
Brand: Alfano
Alfano steering wheel position sensor. Alfano Code A2401. 80cm FLYING position sensor. This potentiometer sensor is used to measure the position of the steering wheel. Designed for the module: Box12 / Box4Move.
Reference: A2405
Brand: Alfano
Alfano pedal position sensor. Alfano Code A2405. 120cm pedal position sensor. This Hall effect sensor is used to measure the position of the brake or accelerator pedal. Designed for the module: Box12 / Box4Move.
Reference: A4530
Brand: Alfano
Connection cable from Alfano 6 to Box. Code Alfano A4530.
Reference: A1204
Brand: Alfano
Box4 Alfano A1204. This module allows the acquisition of the movements of the pedals and the steering wheel. - 2 inputs for pedal movement - 1 x flywheel movement input - 3-axis force sensor integrated in the Boxing machine
