Xmotorstore Payments
There are 59 products.
Reference: A1210
Brand: Alfano
Alfano tire pressure sensor. Alfano code: A1210. Wireless internal air pressure and temperature sensor plus 1 elastic fixing.
Reference: A1600
Brand: Alfano
Rpm cable 250 cm Alfano A1600. This lead is used to read the ignition coil high voltage RPM motor speed. Attention: this article is delivered in the box with the PROIIIevo, ref. A1020, A1021, A1022
Reference: A261
Brand: Alfano
17 mm adapter for Alfano A261 temperature sensor. This adapter must be used with sensors: A2101 / A2111 / A2152.
Reference: A262
Brand: Alfano
19 mm adapter for Alfano A262 temperature sensor. This adapter must be used with sensors: A2101 / A2111 / A2152.
Reference: A263
Brand: Alfano
22 mm adapter for Alfano A263 temperature sensor. This adapter must be used with sensors: A2101 / A2111 / A2152.
Reference: A264
Brand: Alfano
26 mm adapter for Alfano A264 temperature sensor. This adapter must be used with sensors: A2101 / A2111 / A2152.
Reference: A2190
Brand: Alfano
Y extension to connect 2 Alfano A2190 sensors. Y extension to connect 2 sensors: a K technology thermocouple sensor + an NTC technology sensor
Reference: A3401
Brand: Alfano
135 cm Alfano A3401 thermocouple extension, to connect all Alfano thermocouple sensors.
Reference: A2501
Brand: Alfano
Lambda sensor Alfano 40 cm A2501. This LAMBDA sensor must be installed on the exhaust. The value read by this 2-wire lambda probe is effective when the exhaust gases are equal to or greater than 300 °, i.e. only during the acceleration phase. Note: this sensor must be used with an extension cable ref. A3401. Designed for the module: Box12.
Reference: A2157
Brand: Alfano
Alfano temperature sensor candle 10 mm A2157. This K thermocouple technology sensor must be installed with a 10mm diameter plug, 40cm cable length. Caution: It is important to remove the sealing washer from the spark plug before installation. Note: This sensor must be used with an A3401 extension cable or A2190 hub.
Reference: A2156
Brand: Alfano
Alfano temperature sensor 12 mm A2156. This K thermocouple technology sensor must be installed with a 12mm diameter and 40cm length candle. Caution: It is important to remove the sealing washer from the spark plug before installation. Note: This sensor must be used with an A3401 extension cable or A2190 hub.
